Clarke RA40 Linee guida operative - Pagina 2
Sfoglia online o scarica il pdf Linee guida operative per Macchina da pavimento Clarke RA40. Clarke RA40 2.
Stampa la pagina
ATTENTION! Do not use the machine before you have read and understood the Instructions for Use Manual.
The machine
doesn't work
as it should?
1. Check if the power cord is correctly
The suction
doesn't work
as it should?
1. Check if the suction hose is
The machine
doesn't clean
as it should?
1. Check if you have the right
The brush
doesn't work
as it should?
1. Check if there's a brush motor
9435 Winnetka Avenue North
•
Brooklyn Park, MN 55445
Phone: 800.253.0367
•
Fax: 800.825.2753
240 Superior Boulevard
•
Mississauga, Ontario, Canada L5T 2L2
Phone: 800.668.8400
•
Fax: 800.263.5111
2. Restart the machine without
connected and check if the battery
pressing the drive pedal.
is charged.
2. Open the recovery tank and check
correctly installed and cleaned.
to see if the debris tray and float
are clean and working.
2. Check if the solution valve is open.
detergent and water settings.
2. Check if the brush is correctly
overload "WARNING ALARM F2"
installed and not worn out or
on the display.
if there are external materials
preventing brush rotation.
Troubleshooting
3. Check floor inclination is not
4. Check if the electromagnetic brake
exceeding specifications.
3. Check if squeegee blades are
4. Check to see if the lid gasket is in
damaged or dirty.
3. Check to see if the solution filter
4. Check to make sure the Chemical
is clean.
3. Check if the green switch Led of
the One-Touch button is flashing.
Wait until the light is steady.
RA40
™
is locking.
good and working condition and
sealing when the lid is closed.
Mixing System is clean. Eventually
purge the system.