Clarke 6462552 Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Sega Clarke 6462552. Clarke 6462552 17.

ADDITIONAL WARNINGS FOR RECIPROCATING

SAWS

1. ALWAYS use the appropriate blade for the material being cut.

2. ONLY sharp saw blades in perfect working condition should be used;

cracked or bent saw blades should be discarded and replaced at once.

3. ENSURE that the saw blade is securely fixed.

4. ALWAYS use a cooling agent when cutting metals, i.e. cutting oil.

5. When cutting wood, ensure any nails have been removed beforehand.

Nails will damage the wood saw blade.

6. ALWAYS keep the mains cable well away from the machine and ensure an

adequate electrical supply is close at hand so that the operation is not

restricted by the length of the cable.

7. ALWAYS allow sufficient clearance beneath the work to ensure the blade

does not come into contact with the floor, table etc.

8. ALWAYS check for hidden electrical wires or water pipes etc.

9. NEVER allow the ventilation slots in the machine to become blocked.

10. DO NOT cut material above the specified thickness.

11. DO NOT cut through walls or cavities before checking for hidden electrical

wires or water pipes etc.

12. DO NOT touch the blade immediately after use, allow time for it to cool.

13. NEVER attempt to stop the saw blade with your fingers.

14. NEVER put the saw down on a table or work bench unless switched off. The

saw blade will keep running briefly after the tool has been switched off.

15. Wherever possible, use clamps and vices to fasten the workpiece securely.

16. Do not attempt to saw extremely small workpieces.

17. ALWAYS hold the saw with both hands.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]