Clarke DEVIL 2000PTC Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Riscaldatore Clarke DEVIL 2000PTC. Clarke DEVIL 2000PTC 13. 2kw electric fan heater
Anche per Clarke DEVIL 2000PTC: Manuale di istruzioni per il funzionamento e la manutenzione (13 pagine)
Stampa la pagina
• The heater will continue to operate until the power switch is turned to
the OFF position.
6. For fan only operation, turn the power switch to the fan only setting and set
the thermostat to its minimum setting.
7. When not in use, disconnect the heater from the mains supply. Store it in a
safe, dry, childproof location.
ADJUSTING THE ANGLE
1. Loosen both handwheels.
2. Adjust to the the required angle.
3. Retighten the handwheels.
SAFETY SYSTEMS
THERMOSTATIC PROTECTION
The Devil 2000PTC has a thermal cut out to prevent it from overheating.
If the temperature of the front grille gets too high the thermal cutout will turn
off the heating elements. When the fan has cooled the unit sufficiently, normal
operation will resume.
MAINTENANCE
WARNING: ALWAYS DISCONNECT FROM THE POWER SUPPLY AND ALLOW
THE HEATER IT TO COOL DOWN BEFORE PERFORMING ANY
MAINTENANCE TASKS.
• Clean the heater with a soft damp cloth, Do not use solvents or
abrasives.
• Make sure that the heater grille is not blocked.
• No other maintenance is required, should you discover any problem
with the heater, return it to the Clarke service department for repair.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8