DirectOut Technologies BREAKOUT.AN16I Manuale hardware - Pagina 12
Sfoglia online o scarica il pdf Manuale hardware per Hardware del computer DirectOut Technologies BREAKOUT.AN16I. DirectOut Technologies BREAKOUT.AN16I 16.
Stampa la pagina
page 12 of 16
Chapter 3: Installation
Installing the Device
1.
Open the packaging and check that the contents have been delivered
complete and undamaged.
2.
Place the device on a non-slip horizontal surface.
NOT E
Ensure that all concerned devices are switched off before connecting.
3.
Check the patch chords for appropriate pinout and impedance.
Model
BREAKOUT.AN8
BREAKOUT.AN16I
BREAKOUT.AN16O
BREAKOUT.AES
BREAKOUT.AESid*
* For connecting digital signals the use of cables with 110 Ω impedance is
required.
4.
Connect the DSUB-25 ports using appropriate DSUB-25 cables with AES59
pinout.
For connection with PRODIGY Series or ANDIAMO Series patch chords with
DSUB-25 male to DSUB-25 male connectors are required.
Patch chord
analog, one to one wired DSUB-25 cable
e.g. DSUB25.AN50 or DSUB25.AN100
- see "Accessories" on page 11
digital*, cross wired DSUB-25 cable
e.g. DSUB25.AES50 or DSUB25.AES100
- see "Accessories" on page 11
BREAKOUT Series Hardware Guide - Version 2.0
Chapter 3: Installation