Clarke 3120137 Istruzioni per il funzionamento e la manutenzione - Pagina 8

Sfoglia online o scarica il pdf Istruzioni per il funzionamento e la manutenzione per Strumenti Clarke 3120137. Clarke 3120137 17.

OPERATION

LOADING WITH GREASE

This air driven grease gun is designed to be loaded in one of three ways:

• Using a standard 400 gram grease cartridge.

• Loading the container with a filler pump.

• Loading the container by bulk filling.

WARNING: MAKE SURE THE AIR SUPPLY IS DISCONNECTED BEFORE FILLING

THE GREASE CHAMBER.

1. Unscrew the container from the

head of the grease gun.

2. Pull the plunger handle on the

container completely out.

3. Remove any seal or end cap from

the end of the grease cartridge.

4. Insert the grease cartridge all the

way into the container.

5. Re-fit the container to the head of

the grease gun.

6. Press the handle release tab to release the plunger handle.

7. Press the air vent valve to release any excess air trapped inside the gun.

LOADING USING A FILLER PUMP (IF AVAILABLE)

1. Pull the plunger handle on the container completely out.

2. Fit the filler pump to the grease gun inlet valve.

3. Fill the container by pumping the filler pump handle.

4. Disconnect the grease gun inlet valve from the filler pump.

5. Press the handle release tab to release the plunger handle.

6. Press the air vent valve to release any excess air trapped inside the gun.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]