Clarke 6462001 Istruzioni per l'utente - Pagina 4

Sfoglia online o scarica il pdf Istruzioni per l'utente per Strumenti Clarke 6462001. Clarke 6462001 13. 40-piece rotary tool kit

ELECTRICAL CONNECTIONS

This product is provided with a 13 amp BS 1363 plug, fitted with a 13amp fuse and

MUST be connected to a standard, 230 Volt (50Hz) electrical supply, preferably

through an approved plug, or a suitably fused isolator switch.

WARNING: THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in the mains lead should be wired up in accordance

with the following colour code:

As the colours of the flexible cable of this appliance may not correspond with

the coloured markings identifying terminals in your plug, proceed as follows:

•

Connect the GREEN & YELLOW coloured cord to the plug

terminal marked with a letter E or Earth symbol "

coloured GREEN or GREEN & YELLOW.

•

Connect the BROWN coloured cord to the plug terminal

marked a letter "L" or coloured RED.

•

Connect the BLUE coloured cord to the plug terminal marked

a letter "N" or coloured BLACK

If this appliance is found to be fitted with a plug which is moulded on to the

electric cable (i.e. non-rewireable) please note:

1. The plug must be thrown away if it is cut from the electric cable. There is a

danger of electric shock if it is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

3. Should you wish to replace a detachable fuse carrier, ensure that the

correct replacement is used (as indicated by marking or colour code).

4. Replacement fuse covers can be obtained from your local Clarke dealer

or most electrical stockists.

FUSE RATING

The fuse in the plug must be replaced with one of the same rating and this

replacement must be ASTA approved to BS1362.

We strongly recommend that this machine is connected to the mains supply

via a Residual Current Device (RCD).

Green & Yellow - Earth

Blue

Neutral

Brown

Live

" or