Clarke CAR8P Manuale di istruzioni per l'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Strumenti Clarke CAR8P. Clarke CAR8P 7.

MAINTENANCE

WARNING: Whenever servicing or carrying out maintenance tasks, ALWAYS

turn OFF the air supply to the Hose Reel and release any pressure in the line.

Before Use

Check the hose for wear and damage, and the swivel fitting for leakage using soapy

water. Any damage or leaks should be repaired before further use.

Hose Tension Adjustment

Model CAR15P only is provided with a mechanism to adjust the hose tension. This

is achieved as follows:

1. Remove side cover (2 self tapping

screws) to reveal the adjuster plate.

2. Hold the plate steady using a

socket as shown, with 'T' bar, whilst

undoing and removing the 4 plate

securing screws.

3. Turn the plate clockwise or anti-

clockwise, to increase or decrease the

tension, as required, then replace the

securing screws. It is possible to move

the plate by increments of 1/8 turns

Swivel Seal Replacement

The swivel seals will need replacing due to normal wear and tear, from time to

time. This is carried out as follows:

A. Model CAR8P

1. Remove the 4 side cover securing

screws 'A' and pull off the cover to

reveal the swivel hub -'C'.

2. Undo and remove the swivel hub

securing screws - 'B' and pull out the

swivel hub.

3. Renew the single O-Ring seal and

reassemble in reverse order.

IMPORTANT! DO NOT overtighten the

swivel seal securing screws. Damage to

the plastic screw threads is irreparable

- 4 -