DirecTV RC71 Manuale
Sfoglia online o scarica il pdf Manuale per Telecomando DirecTV RC71. DirecTV RC71 3. Use one remote to control four receivers
Anche per DirecTV RC71: Come fare (7 pagine)
Stampa la pagina
RC71 remote control for HR44 and C41 models
Using the RC71 remote control
Most remote controls work by sending an infra-red (IR)
signal to your DIRECTV
directly at your DIRECTV
The RC71 remote control has been factory-set to work
in this way, but you can program it to control your HR44
DIRECTV
Receiver or C41 DIRECTV
®
radio-frequency (RF) signal instead. This means that you
do not have to point the remote control directly at your
DIRECTV
Receiver for it to work.
®
During the programming process, the RC71 remote control
becomes paired with a specific DIRECTV
You can, however, later pair it with a different DIRECTV
Receiver instead, if you wish.
You can also reset your remote control to revert to working
by means of IR. You need to do this first, if you wish to pair
your remote control with a different DIRECTV
You program for RF and reset using on-screen menus,
which give you instructions. The green light on the RC71
remote control flashes at key stages during programming
and reset.
1
Receiver and you must point them
®
Receiver for them to work.
®
Receiver using a
®
Receiver.
®
Receiver.
®
Buttons you use to
program and reset the
RC71 remote control
Green light that flashes
when you program the
remote control
SELECT button
MUTE button
®
CH
Channel up/down
button (rocker switch)
ENTER button