DirekTronik 1000Base-T Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale DirekTronik 1000Base-T. DirekTronik 1000Base-T 11. Gigabit ethernet

Gigabit Ethernet Media Converter

Installation

This chapter gives step-by-step installation instructions for the Converter.

As with any electric device, you should place the equipment where it will not be

subjected to extreme temperatures, humidity, or electromagnetic interference.

Specifically, the site you select should meet the following requirements:

The ambient temperature should be between 32 and 113 degrees Fahrenheit (0

to 45 degrees Celsius).

The relative humidity should be less than 95 percent, non-condensing.

Surrounding electrical devices should not exceed the electromagnetic field (RFC)

standards for IEC 801-3, Level 2 (3V/M) field strength.

Make sure that the equipment receives adequate ventilation. Do not block the

ventilation holes of the equipment.

The power outlet should be within 1.8 meters of the product.

This Converter is a plug-and-play device.

Connect the supplied AC to DC power adapter to the receptacle at the back of the

converter.

Attach the plug into a standard AC outlet.

The Converter is designed to fit into any of the expansion slots on a rackmount

chassis.

Unscrew the carrier from the desired expansion slot on the chassis.

Fit the converter onto the carrier.

When the converter is completely seated onto the carrier, insert the carrier to the

guide rails of the expansion slot.

Carefully slide in the carrier until it is fully and firmly fit the chassis.

Fasten the carrier to the chassis by the screws.

<NOTE>

Never insert any converter into the chassis directly without using

the supplied carriers. The carriers allow secure and consistent placement of the

converters into the chassis' backplane without causing any damage.

User's Manual