CLAS OH 6014 Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Martinetti CLAS OH 6014. CLAS OH 6014 12. Extra low profile service garage jack 2.5t 75mm

OH 6014

CHARACTERISTICS

Rated capacity (safe working load): 2,5T

Lowered height: 75mm

Maximum height: 515mm

Dimensions: 722x328x150mm

Net weight: 33,5Kg

Norm NF EN 1494: 2000 + A1:2009

Jack lifespan: 800 uses

• Read study and understand all warnings and operating instructions prior to use.

• Do not overload this jack beyond the rated capacity.

• This jack is designed for use only on hard level surfaces capable of sustaining the load. Use on other

than hard level surfaces can result in jack instability and possible loss of load.

• This is a lifting device only. Immediately after lifting, support the vehicle with jack stands.

• Do not go under or allows anyone under the vehicle until it has been supported with jack stands.

• Do not move or dolly the vehicle while on the jack.

• Lift only on areas of the vehicle as specifi ed by the vehicles manufacturer.

• Center load on saddle prior to lifting.

• No alterations shall be made to the jack.

• Failure to heed these warnings may result in personal injury and/or property damage.

• DO NOT use the jack to lift people

Because of the potential hazards associated with the misuses of equipment of this type, no alterations

shall be made to the product.

The owner and/or operator is responsible for providing maintenance, maintaining all decals or warning

labels and while in use, maintaining the unit in good working order.

If the owner and/or operator is not fl uent in English or French, the product warnings and instructions shall

be read and discussed with the operator in his native language by the purchaser/owner or his designee.

Make sure that the operator comprehends its contents. Safety information shall be emphasized and

understood prior to usage.

The jack shall be inspected per the instruction manual prior to use.

It is the owner and/or operator's responsibility to study all warnings, operating and maintenance

instructions contained on the product label and instruction manual prior to operation of this unit.

Retain these instructions for future reference.

Raising vehicle:

1. Make sure the jack and vehicle are on a hard level surface.

2. Always set the vehicle parking brake and block the wheels.

3. Consult the vehicle owner's manual to ascertain the location of jack points and position the jack beneath

the prescribed lift point.

EXTRA LOW PROFILE SERVICE GARAGE JACK 2.5T 75mm

WARNING

USE