Lenovo Z series Manuale d'uso - Pagina 32

Sfoglia online o scarica il pdf Manuale d'uso per Desktop Lenovo Z series. Lenovo Z series 35. Brochure
Anche per Lenovo Z series: Opuscolo e specifiche (4 pagine)

Chapter 4. Troubleshooting
The computer does not
operate with a fully charged
battery.

A hard disk drive problem

The hard disk drive does not
work.

A startup problem

®
The Microsoft
Windows
operating system does not
start.
A backup problem
Backup cannot be made.

Other problems

Your computer does not
respond.
The computer does not start
from a device you want.
The connected external
device does not work.
28
The surge protector in the battery might be active. Turn off
the computer for one minute to reset the protector; then turn
on the computer again.
In the Boot menu in BIOS setup utility, make sure that the
hard disk drive is included in the EFI/Boot device priority
correctly.
Use the OneKey Recovery system to restore the system
partition to its original status or a previously created back-
up point. For details about the OneKey Recovery system,
see "Lenovo OneKey Recovery system" on page 23.
You are not currently using a Windows operating system.
There is not enough space to store the backed-up data. You
will need to free more space on the destination device.
To turn off your computer, press and hold the power button
for 4 seconds or more. If the computer still does not
respond, remove the AC adapter.
Your computer might lock when it enters sleep mode
during a communication operation. Disable the sleep timer
when you are working on the network.
See the Boot menu of the BIOS setup utility. Make sure that
the EFI/Boot device priority in the BIOS setup utility is set
so that the computer starts from the device you want.
Press the Novo button when the computer is powered off
and select Boot Device Menu. Then select the device you
want the computer to start from.
Do not connect or disconnect any external device cables
other than USB while the computer power is on; otherwise,
you might damage your computer.
When using a high power consumption external devices
such as an external USB optical disk drive, use external
device power adapter. Otherwise, the device may not be
recognized, or system shut down may result.