Lenovo 42U 1200 mm Deep Dynamic Rack Manuale di installazione - Pagina 22

Sfoglia online o scarica il pdf Manuale di installazione per Server Lenovo 42U 1200 mm Deep Dynamic Rack. Lenovo 42U 1200 mm Deep Dynamic Rack 42.

lock in the open position. This releases the door from the hinges.

Grasp the door firmly with both hands and pull it away from the hinges; then, set the door aside.

Reverse this procedure to install the rear doors on the rack cabinet. Make sure that the door with the spring-

loaded latch is installed on the left side.

Reversing a front door

To reverse a front door on a rack cabinet so that it opens in the opposite direction, complete the following

steps:

1. Remove the door according to

2. Use a hex wrench to remove the top and bottom hinges from the rack cabinet; then, install the hinges on

the other side of the rack.

Note: There are extra screws in the hardware kit in case you drop one into the rack channel.

3. Remove the front door latch and attach it to the other side of the rack.

4. Carefully rotate the door 180°; then, install the door on the other side of the rack by using the instructions

Removing and installing a front door.

Figure 13. Moving the door hinges and front door latch