Lenovo Tripp Lite 2U Manuale di istruzioni per l'installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Server Lenovo Tripp Lite 2U. Lenovo Tripp Lite 2U 19. Rack server

For rack with threaded-holes

Before installing the rails in rack with threaded

holes, first install the adapters on the front and

rear side of the rails.

Choose one of the rails for installation. Line up the

pins on the front of the rail with the two

circle-shaped holes of the adapter 1 . Push the

adapter so that the pins go into the holes and the

front adapter latches on the rail.

Align the 10-32 (L8) screw 2 with the middle hole

of both the adapter and rail, then install the 10-32

(L8) screw.

Slide the cage nut 3 into the adapter. You may

need to slightly squeeze the cage nut in order to do

so.

Note: For racks that have 10-32 thread, the 10-32

cage nut is not required.

Line up the pins on the rear of the rail with the

three circle-shaped holes on the adapter. Push the

adapter 4 so that the pins go into the holes and

the adapter latches on the rail.

Installing the rails in a rack with threaded holes.

Align the pins on the rear of the rail and attached

adapter with the holes on the rear of the rack; then

install the M4 (L8) screws to secure the rail to the

rear of the rack. Repeat this step for the front of the

rail.

Repeat steps 1 and 2 to install the other rail. Make

sure that each rail is securely installed in the rack.

Go to step 3.