Lenovo 10QX Manuale d'uso - Pagina 39

Sfoglia online o scarica il pdf Manuale d'uso per Monitor Lenovo 10QX. Lenovo 10QX 49.

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows 7 and

Microsoft Windows 10.

To use the Plug and Play feature in Microsoft Windows 7, do the following:

Note: You must download file from the Reference and Driver CD to use the Plug and Play

feature in Windows 7.

1. Turn off the computer, all attached devices.

Ensure that the monitor is connected correctly.

3. Turn on the monitor and then the system unit. Allow your computer to start the

Windows 7 operating system.

Open the Display Properties window by clicking Start, Control Panel, Hardware and

Sound icon.

Click the Display icon.

Click the Adjust Resolution button.

Click the Advanced Settings icon.

Click the Monitor tab.

Click the Properties button.

10. Click the Driver tab.

11. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on

Update Driver and then click the "Browse my computer for driver software" button.

12. Select "Let me pick from a list of device drivers on my computer".

13. Insert the Lenovo Monitor CD into the CD drive and click the Have Disk button.

14. Click on the Browse button and navigate to the following directory:

X:\Monitor Drivers\ (where X is the drive letter designator for the CD-ROM drive).

15. Select the "tio24gen3t.inf"file and click the Open button. Click the OK button.

16. Select TIO24Gen3T and click Next. The files will be copied from the CD to your hard

disk drive.

17. Close all open windows and remove the CD.

18. Restart the computer.

The system will automatically select the maximum refresh rate and corresponding color

matching profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.

Lenovo recommends using either 1920 x

refresh rate of 60 Hz.

at a refresh rate of 60 Hz, or 640 x 480 at a

1080

3-8

Chapter 3.