Lenovo 2578HB6 Manuale d'uso - Pagina 18

Sfoglia online o scarica il pdf Manuale d'uso per Monitor Lenovo 2578HB6. Lenovo 2578HB6 37. Wide flat panel monitor

Press

Press and hold

adjustments to the OSD. Press and hold

and allow adjustments to the OSD.

Enables DDC/CI by default. Use OSD Exit Key, press and hold the

10 seconds to disable/enable DDC/CI function. The words " DDC/CI Disable/DDC/

CI/Enable" shows on the screen.

Press "Exit Key" to enter the input Signal meun(picture 2) when the monitor is under

the condition of

choose input signal.

Using the Environment Sensing Utilities software controls

To use the controls:

1. Install the driver of camera from CD.

2. Install the Environment Sensing Utilities software from CD.

3. Open the Environment Sensing Utilities It can help you to use the display and computer in

a healthier way by functions as follows:

a) Brightness Adjustment

The Built-in camera of the display will detect the intensity of the ambient

light, and set the display to an appropriate brightness.

b) Auto Power Saving

The Built-in camera of the display will automatically detect whether the

user is in front of the display or not.

If the user is not in front of the display over a certain period of time ,

the display will automatically enter the power saving mode.

4. You can upgrade the Environment Sensing Utilities from the website:

http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=ENVR-SENSING

to move backwards through the sub-menus and exit from the OSD.

for 10 seconds to lock the OSD. This will prevent accidental

"No sync","No Cable" or "power Saving Mode".press

press "AUTOSCAN" to go back to Auto Scan mode.

for 10 seconds to unlock the OSD

Chapter 2. Adjusting and using your monitor

buttons for

2-4