Clas Ohlson 38-5199 Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Altoparlanti Clas Ohlson 38-5199. Clas Ohlson 38-5199 4.

Bluetooth speaker
Art.no 38-5198, 38-5199, 38-5200
Please read the entire instruction manual before using the product
and save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. If you have any questions regarding technical
problems please contact our Customer Services.
Important details:
Other wireless equipment using the same frequency can
reduce the transmission range.
The range of all wireless equipment depends on the type of
obstacles located between the transmitter and the receiver
(e.g. a concrete wall will interfere with the signal more than
a plasterboard wall).
If you experience problems, try the following:
Turn off any existing wireless equipment to check if this is
the cause of the problem.
Move any other existing wireless equipment. Shorten
the distance between the sending and receiving devices
and reduce the number of obstacles (walls, furniture, etc)
between them.
Safety
Do not place the product where it could fall into water or
other liquids.
Never subject the product to high temperature, dust,
heavy vibration, impacts, humidity or moisture.
If you do not intend to use the speaker for a long time,
switch the ON/OFF switch to OFF.
Make sure that the USB cable does not come into contact
with heat, sharp edges or is crushed.
Never attempt to tamper with or modify the product in any way.
GREAT BRITAIN • Customer Service Contact number: 08545 300 9799, e-mail: [email protected], internet: www.clasohlson.com/uk
Operating instructions
Charging
Model SP103BT
Connect the speaker to a computer or other USB charging
device using the included USB cable. Charge the speaker for
2 hours before using it for the first time.
Bluetooth connection
1. Switch the speaker on. The LED to the right of
the ON/OFF switch will flashe quickly while the speaker
searches for another Bluetooth device and slowly once
the connection has been established.
2. Activate the Bluetooth function on the device to be linked
with the speaker. The Bluetooth device must not be more
than 10 m away from the speaker. Note: If you asked to
enter a PIN code, you should enter "0000" (four noughts).
Certain devices may even require you to approve the
connection.
3. Start playback on the connected device.
Care and maintenance
Clean the product using a lightly moistened cloth. Only use mild
cleaning agents, never solvents or corrosive chemicals.
Troubleshooting guide
The speaker will not
switch on.
No sound from
the speakers.
Bluetooth connection
not possible.
The batteries might be flat.
Charge the speaker.
Check the volume setting of
the connected device.
Make sure that a Bluetooth
connection has really been
established between the device
and the speaker. Refer to
the Bluetooth connection
section above.
The battery might be flat.
Charge the speaker.
Make sure that the Bluetooth
device is no more than 10 m
away from the speaker.
Disposal
This product should be disposed of in accordance with
local regulations. If you are unsure how to proceed,
contact your local authority.
Specifications
Bluetooth-version
2.1
Bluetooth profile
A2DP
1.5 W
Output (RMS)
Range
10 m line-of-sight
Charging input
USB, 5 V
Battery capacity
320 mAh
Diameter
55 mm