Nikon Ti-s/LIOO Manuale di istruzioni - Pagina 24

Sfoglia online o scarica il pdf Manuale di istruzioni per Microscope Nikon Ti-s/LIOO. Nikon Ti-s/LIOO 25. Inverted microscope

Stampa la pagina

1.7

Power Supply

1.7.1

TI-PS100W Power Supply

Warning

The bottom of the power supply device becomes hot during use. Do not block the air vents on

the side of the product.

POWER indicator

Brightness

control knob

POWER switch

This is the power switch for the power supply. Press

the "I" side of the switch to turn on the power supply

and output DC power from the 12VDC output on the

rear. Press the "O" side of the switch to turn off the

power supply.

POWER indicator

Lit when the power supply is on.

Brightness control knob

When the EXTERNAL switch is turned off, the knob

controls the brightness of the lamp by adjusting the

voltage supplied from the 12VDC output connector.

AC inlet

This is the connector for connecting the power

supply device to a wall outlet. Be sure to use the

specified power cord for the connection.

EXTERNAL (external control) ON/OFF switch

Turn this switch on to use the brightness control

knob on the microscope for output voltage control.

When this switch is turned off, the brightness control

knob on the front of the power supply becomes

enabled, and the brightness control knob on the

microscope becomes disabled.

Chapter 1 Part Names

1.7 Power Supply

AC inlet

Figure 1-22 TI-PS100W Power Supply

EXTERNAL (external control signal input)

connector

Connect the control cable to this

connector and the LAMP CTRL

connector on the rear of the

microscope.

Pin Signal

12VDC output connector

This connector supplies power to the 12V 100W

halogen lamp. Connect the lamp cable for the pillar

illuminator.

EXTERNAL ON/OFF switch

External resistor terminal for output voltage adjustment

Output voltage ON/OFF switch (input)

GND (0V)

External voltage input for output voltage adjustment

EXTERNAL switch on/off detect signal (output)

GND (0V)

Output voltage monitor terminal (output)

Connector: HR12-10R-8SC by Hirose Electric Co., Ltd.

Connector: SRCN2A13-3S by Japan Aviation Electronics Industry, Ltd.

12VDC output

connector

EXTERNAL connector

Signal

Output +

Output -

Not used