Nikon R10 Super Zoom Manuale di istruzioni - Pagina 27
Sfoglia online o scarica il pdf Manuale di istruzioni per Macchina fotografica a pellicola Nikon R10 Super Zoom. Nikon R10 Super Zoom 36.
Anche per Nikon R10 Super Zoom: Manuale di istruzioni (37 pagine)
Stampa la pagina
Reverse Filming Operation
■Reverse filming not only makes fascinating cinematography possible but it
also achieves a number of speciai effects that would be impossible when
filmed in the normai way.
1. Cover the lens with a lens cap or close the shutter opening with the
shutter blade opening control.
2. Depress the trigger while maintaining the FE control in the forward
position. Winding stops automatically (in about 5.5 sec. at 18 fps).
3. Set the REW/FOW switch to the REW position.
4. Reverse the operation performed in step 1 by either removing the lens cap
or fully opening the shutter.
5. Depressing the trigger performs reverse filming. Filming automatically
stops at the exact position where winding began (at 18 fps; 5.5 sec.).
6. Replace the lens cap or reclose the shutter opening.
7. Set the REW/FOW switch to the FOW position.
8. Depress the trigger to wind back the film sequence (at 18 fps: 5.5 sec.).
(To prevent undesired double exposures at the end of the reverse action
sequence, rewinding should be performed for a period longer than the
already exposed frames; rewind for more than 100 frames and edit the
unexposed film after development.) After rewinding, resume normal
filming by either removing the lens cap or fully open the shutter.
Note; Although the 100-framc reverse filming sequence is performed automatically, it
can be shortened to less than 100 frames by releasing your hold on the trigger before the
filming automatically stops.
Caution: Do not perform reverse filming when the footage counter needle Is within the
first and last 5-foot zones and at a film speed of 54 fps.
CINE-TECHNIQUES-
n