Dirt Devil Centrino Cleancontrol Manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Manuale operativo per Aspirapolvere Dirt Devil Centrino Cleancontrol. Dirt Devil Centrino Cleancontrol 13. Centrino cleancontrol bagless cylinder vacuum cleaner

Stampa la pagina

Maintenance

3.1 Emptying the dust container

Empty the dust container after each vacu-



uming session to maintain the performance of

your cylinder vacuum cleaner.

Empty the dust container at the latest when



the "MAX" mark on the dust container has been

reached or when the cleaning indicator (Fig. 1/

8) lights up.

ATTENTION:

Switch off the appliance before emptying the

dust container. In this way, you will prevent

dust from soiling and damaging the appli-

ance.

1. Release the dust container by pressing the

release catch (Fig. 8) and then remove the

dust container from its holder,.

NOTE:

Be careful when removing the dust filter bag

so that no dust escapes.

2. Empty the dust container by holding it low

over a dustbin and only then push the but-

ton (Fig. 9/1) to fold down the bottom plate.

NOTE:

You can dispose of the dust filter bag with

your regular domestic trash as long as it con-

tains no waste materials prohibited in

domestic trash.

Centrino

cleancontrol

3. Remove any residual dust that may have

collected in the dust compartment.

4. Fold the bottom plate back up. It will snap

shut with a distinct click.

5. Also clean or exchange the motor protec-

tion filter on this occasion. Chapter 3.4,

"Cleaning / changing the motor protection

filter".

6. Put the dust container back into its holder.

You must feel and hear it click into place.

3.2 Changing filters

ATTENTION:

All filters may not be machine-washed or

cleaned in dishwashing-machine.

Keep the cleaning and changing intervals



given below.

Replace damaged filters as soon as possi-



ble.

The following 3 filters are installed:



Exhaust filter (Fig. 10/1)

- Cleaning: according to the degree of soil-

ing, but at least once per month

- Changing: every 6 months



Motor protection filter (Fig. 10/2)

Dust and dirt particles can fix themselves to the

motor protection filter and reduce the airflow.

- Cleaning: according to the degree of soil-

ing, but at least once per month

Changing: every 6 months

Central laminar filter (Fig. 10/3)



Dust and dirt particles can become attached to

the central laminar filter and reduce the airflow.

- Cleaning: To maintain suction perfor-

mance, clean the filter after each vac-

uuming session.

- Changing: If the central laminar filter is

very dirty or it is no longer possible to

clean it, replace it with a new filter

(Chapter 5.1, "List of consumable

parts").

Maintenance

3.3 Cleaning / changing the

exhaust filter

1. Switch off the appliance.

2. Push down the release catch of the exhaust

filter cover and fold down the exhaust filter

cover (Fig. 11).

3. Remove the exhaust filter.

4. Hold the exhaust filter with its holder over a

dustbin and then separate the filter element

from the holder.

5. Tap the dust out of the exhaust filter ele-

ment. If this is insufficient for cleaning it,

wash it thoroughly by hand, wring it out and

let it dry for at least 15 hours before replac-

ing it in the appliance.

6. Put the cleaned or new exhaust filter ele-

ment (Chapter 5, "Spare parts") into the

filter holder.

7. Put the exhaust filter back into its holder.

8. Attach the exhaust filter cover first at the

bottom side and then fold it (Fig. 12)shut

until you feel and hear it snap into place.