Dirt Devil DC-RB21 Manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Manuale operativo per Aspirapolvere Dirt Devil DC-RB21. Dirt Devil DC-RB21 6. Bagless cylinder vacuum cleaner

Stampa la pagina

4 Troubleshooting and technical data

4.1.

Before you send in the appliance

WARNING:

Danger of injury! Never use a defective appliance! Always switch

off the appliance and disconnect it from the mains before starting

troubleshooting.

Before contacting us or even sending the appliance to us, use the table to

check whether you can correct the problem yourself.

Problem

Cleaning/

The dust container is full.

emptying display

Empty and clean the dust container Chapter

lights up (Fig. 16).

3.1, 'Emptying the dust container and cleaning the

motor protection filters'.

The filters are dirty.

Clean the filters, Chapter 3.1, 'Emptying the dust

container and cleaning the motor protection filters'

or Chapter 3.2, 'Cleaning/changing the exhaust

filter'.

Nozzle, telescopic tube or suction hose is blocked.

Remove the obstruction. If necessary, use a long

wooden stick (e.g. a broomstick) to do this.

The vacuum

The overheating protection has tripped (possibly

cleaner stops

due to blocked suction channels, filters, or similar).

suddenly.

1. Switch the appliance off and pull the plug out

of the socket.

2. Remove the cause of overheating (e.g. by

disassembling telescopic tube and suction

hose and removing the obstacle and/or

cleaning filters).

3. Wait approx. 45 minutes until the appliance

has cooled off.

4. After the appliance has cooled off, you may

switch it on again.

isposal

4.2.

Dispose of the appliance in compliance with the environmental

protection laws of your country. Electrical waste may not be

disposed of together with domestic waste. Use local old-

appliance collection points instead.

4.3.

Technical data

Type of appliance

Model name

Model number

Voltage

Power

Maximum usable volume of the

dust container

Power cord length

Weight

DD 2210_Rebel 21_Eng_forquotation_091115.indd 6

Possible cause / solution

: bagless cylinder vacuum cleaner

: Rebel

: DC-RB21

: 220-240 V~, 50/60 Hz

: 1,800W

: approx. 2.7 litres

: approx. 6 m

: approx. 4.9 kg

Technical and design

specifications may be changed in

the course of continuous product

improvement.

Problem

Possible cause / solution

The cleaning

The bypass vent (Fig. 5) is open.

results are

Close the bypass vent (Fig. 5).

unsatisfactory

Position of the suction power control is not

in spite of the

appropriate (Fig. 14).

appliance working

Adjust the position of the suction power control

correctly.

(Fig. 14). ( For Rebel 21 only )

The attached nozzle is unsuitable.

Change the nozzle, Chapter 2.1, 'Assemble

appliance and adjust nozzles to surface'.

The collar brush of the floor nozzle is not

in a position appropriate to the type of floor

(Figures 9 – 10).

Adjust the position of the collar brush to the type of

floor using the floor nozzle switch (Figures 9 – 10).

The dust container is full.

Empty and clean the dust container Chapter

3.1, 'Emptying the dust container and cleaning the

motor protection filters'.

The filters are dirty.

Clean the filters, Chapter 3.1, 'Emptying the dust

container and cleaning the motor protection filters'

that is Chapter 3.2, 'Cleaning/changing the

exhaust filter'.

NOTE:

If you cannot solve the problem following these instructions, contact our

customer services .

The filters are made from environment-friendly materials. You can dispose

of these — as opposed to the appliance — in your domestic waste unless

you have cleaned up substances that are prohibited from disposal in this

way.