Cub CB-824 Manuale di installazione rapida - Pagina 3

Sfoglia online o scarica il pdf Manuale di installazione rapida per Lettore di codici a barre Cub CB-824. Cub CB-824 4.

Media Installation

1. Lift open the

2. Move the label roll

printer's Media Door.

guard horizontally to

Push the print head

the end of label spindle

release lever to open

then flip down the

the print head

label roll guard.

mechanism

4. Pull the label rolls leading edge forward over the media guide bar, under the damper,

through the media sensor placing the label's leading edge onto the platen roller.

3. Place the roll of media

on the label supply

spindle. Push the label roll

until it is flush with the

printer side wall. Flip up

the label roll guard. Move

the label roll guard

horizontally to gently fit

the width of label roll.

5. Adjust the label guide to fit the width of the label.

6. Close the print head mechanism making sure the latches are engaged properly.

You will hear the printhead click when locked in place. You will need to apply

some downward pressure to lock the printhead mechanism.

Label guide