Dirt Devil F90 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Aspirapolvere Dirt Devil F90. Dirt Devil F90 14.

• Hold plug when rewinding onto cord reel. Do not allow plug to whip when

rewinding.

• Use only as described in this manual. Use only manufacturer's recommended

attachments and products.

• Always turn off this appliance before connecting or disconnecting either hose,

motor ized nozzle or turbo floor nozzle.

• The hose contains electrical wires. Avoid picking up sharp objects. If hose appears

damaged, cut, punctured, or wires are exposed, unplug unit and discontinue use.

Do not attempt to repair damaged hose, take to an authorized service center for

repair.

• Any other servicing should be done by an authorized service represenative.

• If appliance is not working as it should, has been dropped, damaged, left

outdoors, or dropped into water, take it to a service center prior to continuing use.

CAUTION-TO REDUCE RISK OF DAMAGE:

• Avoid picking up hard, sharp objects with this product as they may cause damage.

• Store appropiately indoors in a dry place. Do not expose machine to freezing

temperatures.

• Do not use sharp objects to clean our hose as they can cause damage.

• Do not allow power nozzle with brushroll running to sit in one location for an

extended period of time, as damage to floor can result.

SAVE THESE INSTRUCTIONS

WARNING:

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider

than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit

fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to

install the proper outlet. Do not change the plug in any way.

An internal thermal protector has been designed into your cleaner to protect it from

overheating. When the thermal protector activates the cleaner will stop running. If this

happens proceed as follows:

1. Turn cleaner OFF and disconnect it from the electrical outlet.

2. Empty dirt cup.

3. Inspect the nozzle, inlet, nozzle connector, hose connector, hose, dirt cup

inlet, cyclonic filter, rinsable filter, and HEPA filter for any obstructions.

Clear obstructions if present.

4. When cleaner is unplugged and motor cools for 30 minutes, the thermal

protector will deactivate and cleaning may continue.

If the thermal protector continues to activate after following the above steps, your cleaner

may need servicing.