Dirty Hand Tools 103350 Manuale operativo - Pagina 12

Sfoglia online o scarica il pdf Manuale operativo per Tiller Dirty Hand Tools 103350. Dirty Hand Tools 103350 16. 10” mini-cultivator

Operating Instructions

PRACTICE OPERATING THE CONTROLS AND USING

THE CULTIVATOR WITH TINES OUT OF GROUND

BEFORE BEGINNING TO TILL.

It is important that you know how to use the cultivator properly,

keep control at all times, stop the tines and wheels from turning,

and stop the engine if necessary.

Read the entire Operation Manual before using the equipment!

Cultivating

Start the cultivator (rotating the tines) by pulling up on the drive

lever - this will engage the tines.

Pulling the drive lever toward the handlebar engages the tines.

Releasing the lever stops the tines.

Note: You can slow the cultivator's forward advance at any time by

putting slight downward pressure on the handlebars. Stop the

cultivator by releasing the drive lever and then stop the engine.

e key to successful cultivating is to begin with a shallow cut on the

rst pass, and then work an inch or two deeper on each successive

pass.

• Tilling depth will vary with ground conditions.

• When beginning to till in unbroken ground or in extremely hard

soil perform shallow tilling rst then do a second pass going deeper

into the soil.

• Hold on rmly to the handlebars to control sudden lurches.

Immediately release the drive control lever if the tines jam or you

strike a foreign object. With the drive lever released, push the throttle

control to the stop position to stop the engine. Disengage the spark

plug wire. When tines have stopped, remove foreign objects and

check for damage.

WARNING