Dirty Hand Tools 100450 Manuale operativo - Pagina 15
Sfoglia online o scarica il pdf Manuale operativo per Spaccalegna Dirty Hand Tools 100450. Dirty Hand Tools 100450 16. 3-point hitch vertical/horizontal log splitter
Maintenance
1. With normal use the log splitter will not require any regular
maintenance other than checking for loose bolts and the inspection
of hoses and fittings.
2. If the wedge becomes dull or nicked, it can be removed and
sharpened. Remove the 1/2 in. diameter bolt that connects the
wedge to the cylinder.
removed. While the log splitter is in the horizontal position, loosen
the hose clamp and disconnect the hose from the valve. Carefully
lift the cylinder to allow the wedge to slide forward.
now be lifted off and sharpened.
3. See also Repair and Maintenance Safety on page 8 of this manual.
4. All replacement parts must meet manufacturer's specifications.
Splitting Force and Cycle Time
Splitting force is determined by cylinder size and tractor PSI. Cycle
time depends on cylinder size and GPM's that the tractor produces.
Tractor should ideally produce 8-15 GPM at 1500 to 2500 PSI.
Do not exceed 3200 PSI. See tables below for approximate splitting
force and cycle time calculations.
e 3-Point Hitch Log Splitter is designed for tractors with pressure
ratings that are under 3200psi. Exceeding the recommended pressure
rating will void the warranty and damage the equipment.
Splitting Force in Tons
Cylinder Dia.
1000 psi
1500 psi
3"
3.5
3-1/2"
4.8
4"
6.3
4-1/4"
7.1
4-1/2"
7.9
5"
9.8
Cycle Time in Seconds
Cylinder Size
5 GPM
10 GPM 15 GPM 20 GPM
3" x 24"
15.4
3-1/2" x 24"
21.8
4" x 24"
28.3
4-1/4" x 24"
32.4
4-1/2" x 24"
36.6
5" x 24"
45.0
e hose from the valve may need to be
!
WARNING
2000 psi
2500 psi
3000 psi
5.3
7.1
8.8
7.2
9.6
12.0
9.4
12.6
15.7
10.6
14.2
17.7
11.9
15.9
19.9
14.7
19.6
24.5
25 GPM
7.7
5.1
3.9
10.9
7.3
5.4
14.2
9.4
7.1
16.2
10.8
8.1
18.3
12.2
9.2
22.5
15.0
11.3
e wedge can
3500 psi
10.6
12.4
14.4
16.8
18.8
22.0
21.3
24.8
23.9
27.8
29.5
34.3
3.1
4.4
5.7
6.5
7.3
9.0
15