Dirty Pro Tools A388 ELBL Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Soffiante Dirty Pro Tools A388 ELBL. Dirty Pro Tools A388 ELBL 10. Electric

Always pull the power plug before making adjustments to the equipment.

Fitting the debris bag

First hang the eyelet on the hook on the suction tube. Then slip the debris bag over the port on the

motor housing. Make sure that there is an audible click when they engage.

Operation

Connecting the equipment to the power supply and switching on

The equipment can be connected to any socket outlet (with 230 V AC) that is equipped with a 10A

fuse or higher. The socket-outlet has to be safeguarded by an earth-leakage circuit breaker (e.l.c.b.).

The operating current must not exceed 30 mA.

Insert the equipment's plug into the power cable coupling (extension).

Secure the power cable with the strain-relief clip provided on the equipment .

To switch on, push the On/Off switch toward "I".

To switch off, push the On/Off switch toward "O".

Selecting the mode of operation

Suctioning

Turn the lever to position A. You can do this both when the equipment is at a standstill and while it is

running.

Blowing

Turn the lever to position B. You can do this both when the equipment is at a standstill and while it is

running.

Channel the air stream forward and walk slowly to blow foliage or garden refuse into a pile or to

clear out hard-to-reach places.

Caution!

Empty the debris bag before blowing. Otherwise, the material that has been vacuumed up could

drop out.