DIS DM 6680 F Scheda tecnica
Sfoglia online o scarica il pdf Scheda tecnica per Sistema di conferenze DIS DM 6680 F. DIS DM 6680 F 2. Conference unit
Stampa la paginaDM 6680 F Conference Unit
• Flush-mounted delegate conference unit
• Chip card reader
• 3-button and 5-button voting and attendance check
• Channel selector
• Loudspeaker
• Lockable XLR microphone connector
Description
The DM 6680 F is a fully digital flush-mounted conference unit in the DCS 6000
Digital Conference System.
The unit is designed as a fully featured conference unit with chip card reader, vot-
ing and channel selector functionality. It features a microphone button, a chip card
reader, five voting buttons, a headphone jack, a channel selector, a loudspeaker
and a lockable XLR microphone connector.
The microphone button enables the user to activate/deactivate the microphone
either directly or by a request to speak. A button LED indicates whether the micro-
phone is on (red LED) or in request to speak mode (green LED).
The floor channel is distributed through the built-in loudspeaker except when the
microphone is turned on. The user can also listen to the floor channel by inserting
headphones in the headphone jack and adjusting the volume with the volume but-
tons. Optionally, the channel selector can be used for listening to an interpretation
channel.
The voting buttons enable the user to participate in attendance checks, 3-button or
5-button voting sessions. Attendance checks and voting sessions are initiated from
the SW 6000 or a DC 6990P conference unit.
Access to the unit can be restricted by the use of login with chip cards. Chip card
login is enabled from the SW 6000 and is only available in combination with the
SW 6000.
The DM 6680 F can be used in combination with the gooseneck microphones GM
652x or GM 6622 or the boundary microphone BM 6620.
The gooseneck microphones GM 652x or GM 6622 can be locked to the unit with
a 2 mm hex key. The lock is accessible from the small hole to the right of the XLR
socket. Turn the hex key clockwise to enable the lock and insert the gooseneck
microphone into the XLR socket. Turn the hex key counter clockwise to disable the
lock and remove the gooseneck microphone.
The boundary microphone BM 6620 can be retrofitted by replacing the XLR insert
in the plastic adaptor with the boundary microphone. The molex mini-connector fits
with the microphone connector on the PCB.
DIS Digital Conference Systems
DM 6680 F Conference Unit
Features
The DM 6680 F has the following standard features:
• Standard conference unit for delegates
• Fully digital audio transmission
• Daisy chain topology with loop-through connections or star
topology using junction boxes
• CAT 5e (or higher) F/UTP or U/FTP cabling
• Maximum 3800 conference units per system
• Support for four microphone operation modes; Automatic,
FIFO, Manual and VOX (voice activation)
• Support for three microphone interrupt modes enabling 'ping
pong' mode
• Auto off of microphones
• Lockable XLR gooseneck microphone connector
• A high-quality loudspeaker
• One channel selector supporting the floor channel and 31
interpretation channels
• One headphone jack
• A chip card reader
• One microphone button with LED indicators for speak and
request to speak
• Five voting buttons for:
• 3-button voting
• 5-button voting
• Attendance check
By connecting a PC running the SW6000 Conference
Management Software, the following additional feature is
available:
• Login with chip card
Data sheet DS-DM6680 F-d