Disc Makers ElitePro Manuale d'uso

Sfoglia online o scarica il pdf Manuale d'uso per Duplicatore di dischi Disc Makers ElitePro. Disc Makers ElitePro 13. Elite series

ElitePRO_Getting_Started_03.indd 1

Instructions to get your ElitePRO duplicator

set up, powered, and running

Setting up the equipment

The ElitePRO duplicator has been engineered for easy setup and simple use. Fol-

low the instructions in this guide to start using the equipment quickly. The proce-

dures take you through the steps necessary to connect the duplicator to a monitor,

cable the components together, prepare the printer for use, run the FlexWare dupli-

cation software for the ﬁrst time, and perform a simple disc copy and print opera-

tion. Once you have completed the steps in this guide, refer to the Elite Series User

Guide for more information about using your duplicator.

Choosing a setup location

Set up the duplicator on a sturdy, vibration-free work surface away from sources of

airborne contaminants and strong electromagnetic ﬁelds. The duplicator should

also be set up away from direct sunlight or very strong artiﬁcial light; the optical

sensors inside the unit may not operate properly if ambient light levels are too high.

For consistent duplication results, whether attended or unattended, we strongly

recommend the use of an Uninterruptible Power Supply (UPS) for isolating the

2/20/06 4:39:51 PM