Blade 350 QX2 Manuale di istruzioni - Pagina 9
Sfoglia online o scarica il pdf Manuale di istruzioni per Quadcopteri Blade 350 QX2. Blade 350 QX2 18.
Stampa la pagina
Audible Alerts and LED Codes
Audible Alerts
Event
ESC power on
Successful initialization
RC signal detected after start
Bind detected
Bind accepted (3 seconds after detected)
Throttle stick in correct position for motor start
Cannot start motors because of low voltage
Cannot start motors because vehicle is tilted
Enter ESC ID assignment mode
GPS Lock Acquired/Lost
Initialization Audible Alerts
Event
Gyro, accelerometer sensor error
Compass initialization error
Pressure sensor initialization error
GPS initialization error
ESCs not detected
Settings saved (i.e. when changed GPS on/off, etc)
Low-battery warning
Emergency state warning
(also after ESC ID assignment)
Startup LED Codes
Initialization failed
IMU initialization
Fully charged battery
Partial battery charge
Fully discharged battery
Emergency mode
(cycle power to reinitialize)
Return to home mode activated
The quadcopter is in Bind mode
Audible Alert
one short beep
many continuous tones with increasing frequency
one long tone
one long tone
one long tone
low, med, high (happy tone)
high, med, low (sad tone)
high, med, low (sad tone)
loud high, low — high, low
3 short beeps, pause, then 3 short beeps
Audible Alert
High, low, 1 short tone
High, low, 2 short tones
High, low, 3 short tones
High, low, 4 short tones
High, low, 6 short tones
Rapid low, med, high — low, med, high
Medium frequency, loud tone (every 3 seconds)
Once per second loud medium tone
Sequence
1 second
1 second
9
The motors will beep under the following conditions:
• Any time the props stop spinning after they have
been initialized.
• After 30 seconds of no throttle input
(waiting armed on the ground).
Pulsing red
Red, green and blue fl ash once
Green (~2 second duration)
Color indicates level of battery charge
(~2 second duration)
Red (~2 second duration)
White fl ashing
Rapid red fl ashing
Rapid blue fl ashing
1 second
EN