Blade CG02+ 3-Axis Manuale di istruzioni - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per Fotocamera digitale Blade CG02+ 3-Axis. Blade CG02+ 3-Axis 17. Brushless camera/gimbal

Stampa la pagina

Using the CGO2 App

• With the CGO2+ powered on, open the WiFi

settings on your smartphone or tablet and

connect to the CGO2 GB network

(CGO2 GB_******) using the password

"1234567890".

• Open the CGO2 GB App on your device.

Using the CGO2+ With Your ST-10+ Personal Ground Station

NOTICE: The ST-10+ transmitter is not compatible

with any receiver equipped with Spektrum

DSM2

or DSMX

1. Insert the micro SD card into the slot on the bottom

of the camera.

2. Place the quadcopter on a ﬂ at and stable surface.

Ensure there are no obstructions in the path of the

CG03.

3. Switch on your transmitter.

4. Switch on your quadcopter.

After the CGO2+ camera powers on, the LED on the

gimbal will glow red for approximately 40 seconds.

When the LED changes to yellow, complete the

following steps to bind the CGO2+ to the ST-10+:

5. Select Flight Settings from the main menu on the

ST-10+.

6. Select the Bind option.

7. Under Camera, select the CGO2 network

(CGO2_******).

8. Touch the Password line on the screen and enter

the password "1234567890" on the touchscreen.

technology.

You can now take still photos or start/stop recording

video by using the on-screen controls on your

device.

It is possible to take still photos at any time, even

while you are recording live video.

Be sure to check for updates to the CGO2 App in the

iTunes App Store, or Google Play Store.

9. Select OK.

™

DSM

10. The ST-10+ will indicate a successful connection.

Select OK.

11. Return to the Main Menu.

The live video feed is now visible on the ST-10+

display.

Double tap on the image to expand the video to ﬁ ll the

display. Double tap again to return to the main menu

with live video.