Discount Car Stereo A2D-SRX Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Automobile Accessories Discount Car Stereo A2D-SRX. Discount Car Stereo A2D-SRX 7.

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This document is provided as a GENERAL installation guide, some vehicles vary and may

require additional steps. We do not accept responsibility for third party labor charges or

modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage

•

Requirements

XM Module (U2K)

Introduction

Looking to stream music application in your 1

radio and XM module? Our A2D-SRX Bluetooth module, allows these vehicles

owners to stream music applications (e.g., Pandora, Apple Music, SiriusXM,

Spotify etc.) from Smartphone, Tablet, Kindle etc. through the navigation radio

XM port. A wireless connection means no wires, clutter or complicated setup.

The two requirements for this module to work are:

1. Navigation radio

2. XM module (with or without subscription).

If XM subscription is active, select "Subscribed", if expired, select "Not

subscribed"; however,

if not currently subscribed but plan to renew in the

future; select "Subscribed" otherwise XM will not play upon activation.

To verify vehicle has required XM module; press radio "BAND" button to switch

between AM, FM, XM1, XM2. If XM1/XM2 softkeys are not grayed out; vehicle has

required XM module and compatible with the A2D-SRX.

See Frequently Asked question at the end of this guide for details.

Generation SRX with Navigation

Installation

Navigation radio must be removed from dashboard to gain access to connectors.

SRX navigation radio removal:

Using a panel removal tool, unclip and remove the top A/C vents panel

(See Fig. 1)

Open ash tray and remove tray. Extract (1) 9/32" (7mm) screw from

tray cavity.

Using panel removal tool, unclip and remove A/C control/ash tray

assembly below radio (See Fig. 2)

Fig. 1