Arnica LOTUS YS-1800 Manuale di istruzioni - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per Aspirapolvere Arnica LOTUS YS-1800. Arnica LOTUS YS-1800 5. Dry electric vacuum cleaner
Stampa la pagina
B.
HOSE AND TUBE GROUP (Figure 1)
This group includes flexible hose with handle, extension tubes, and other functional
units. Accessories can be fixed directly to the handle without the use of extension tubes. An
air valve is placed on the handle to adjust the vacuum power.
B1 - Flexible Hose
B2 - Handle
B3 - Air Valve
B4 - Extension Tubes
» Plastic Tube (YS-1600)
» Telescopic Tube (YS-1800)
B5 - Main Brush (YS-1800)
B6 - Tube Hook
B7 - Main Brush (YS-1600)
C.
ACCESSORIES GROUP (Figure 2)
For different functions, various accessories can be used.
C1 - Accessories Holder (YS-1800)
C2 - Crevice Nozzle
C3 - Round Brush (YS-1800)
C4 - Small Brush
C5 - Turbo Brush (YS-2400)
Turbo Brush (YS- 2400)
The brush has a removable brush bar cover which gives you easy access to the brush
bar and a switch which allows you to vacuum hard floors without the risk of scratching in
addition to vacuuming carpets and rugs.
T1 - Brush body
T2 - Rubber bumper seal
T3 - Brush soleplate
T4 - Small wheels
T5 - Elbow and tilt mechanism
T6 - Large wheelies
T7 - Big Brush bar cover
T8 - Spiral brush bar
T9 - Brush bar cover access latches
T10 - Hard floor and carpet selector
D.
MODELS
Accessories used in models:
Accessories
Electronic Card
Telescopic Tube (nickel-plated)
Plastic Tube
Crevice Nozzle
Main Brush (B5)
Main Brush (B7)
Small Brush
Round Brush
Accessories Holder
Turbo Brush
III. TECHNICAL SPECIFICATIONS
Voltage
: 220-230 V,50-60 Hz
Power
: IEC 1400 W, max. 1600W
Output Power
: 300 Watt
Elec. Isolation Class
: II
Power Cord Length
: 5m.
Weight (Gross/Net)
: 6.8/ 5.5 kg
Used Life
: 7 Year
Max. Noise Level
: Less than 70 dB (A) EN ISO 7779
IV.
PREPARATION FOR USE
• Release the top section cover by pulling the dip locks outwards. (Figure 3)
• Place the dust bag and close the top section cover (Figure 4-3)
• Fix the flexible hose to the suction opening by using the latches (Figure 5)
• Hold the plug, pull the power cord to the desired length and plug it to the socket. (Figure
6)
• Turn on the appliance by using the On/Off Switch (Figure 7)
• Adjust the vacuum power by turning the air valve on the handle
• Vacuum power can be adjusted electronically by using the adjustment button
(Electronic Model Only)
• Check the Dust Full Indicator. If the indicator shows red;
» Dust bag is full. Change the dust bag.
» There might be a blockage inside the brushes, tubes or hoses; clean inside them.
V.
OPERATING THE APPLIANCE
• Choose the most appropriate accessories for the task you are going to perform and fix
those accessories directly to the handle or to the extension tube.
• For an effective cleaning, following accessories can be used:
» Main Brush: For carpets, rugs, tiles, parquetry, marble surfaces
» Crevice Nozzle: For narrow areas such as radiators,drawers, corners etc.
» Extension Tube without brush: For soil, wood chippings, hair, fur and etc.
» Round Brush: For removing the dust on shelves, lamps, shades, clothes, furnitures,
YS-1600
YS-1800
T-2400
electronic devices and etc. Should be fixed to the crevice nozzle
» Small Brush: For pillows, matresses,cushions and couýches
» Turbo Brush : For especially effective cleaning of carpets and rugs surfaces.
• Plug the appliance to the power socket and turn on the appliance by pressing the On/
Off Switch.
• After the use of the appliance:
» Turn off the appliance and unplug it from the power socket.
» Press the Power Cord button to rewind the cable.(Figure 6)
Warning! Only rewind if the cable is dry. Do not rewind the cable if it gets wet for
your safety.
First dry the cable, and then rewind it!
• Brushes,tubes, crevice nozzle and hose can be placed to the parking socket when you
are not using the appliance.
• Do not preserve the appliance outdoors or at the temperatures that are below freezing
degrees.
• Replacing the dust bag:
» Turn off the appliance and unplug it from the power socket.
» Remove the hose from the suction opening by pressing the buttons on the sides
(Figure 5)
» Open the top section cover by pulling the latch upwards. (Figure 3)
» Remove the dustbag by pressing the latches on the side (Figure 4)
» Replace the dustbag. The new dustbag can be obtained from the certified services.
» Close the top section cover.
Warning! If your vacuum cleaner does not have a dustbag, do not force the upper
cover, because the cover will be not closed.
VI. CLEANING AND MAINTENANCE
• Always unplug the appliance before starting any cleaning and maintenance operations.
• Always clean the hose, tubes, filters and accessories after use.
• To ensure perfect hygiene and to extend your vacuum cleaner's life, never leave the
appliance dirty.
• Clean the appliance's surface, tubes and accessories with a moist towel and dry it
afterwards.
• Clean the textile filter by shaking before it's pores get completely filled. If it gets
completely dirty, the filter can washed with warm, soapy water or running water.
Warning! Never wash the textile filter at washing machines nor hot water.
• Keep the accessories on the accessories holder after use. Check if the cable is damaged
after rewinding the cable.
• Use only original accessories and parts to ensure effective cleaning, to extend your
vacuum cleaner's life and to benefit from warranty. The parts and accesories can be
obtained from a certified service.
• To clean the motor filter (A12):
» Turn off the appliance and unplug it from the power socket.
» Open the top section cover.
» Remove the dust bag.
» Remove the motor filter by pulling it from its socket.
» Wash the filter with water and leave it to dry. Never put a wet filter!
» Place the filter back to its socket
» Replace damaged filters with new ones. A new filter can be obtained from a certified
service.
» Do not operate the appliance without the motor filter.
• To clean the output air filter (A13):
» Use the latch (A14) on the air filter cover to open the cover.
(Figure 9)
» Remove the filter from its socket and shake it. The filter can also be cleaned by
vacuuming.(Figure 10)
» Place the filter back to its socket.
» Replace damaged filters with new ones. A new filter can be obtained from a certified
service.
» Do not operate the appliance without the air filter
• To clean the Turbo Brush (For Turbo - 2400 Model)
» The cleanness of the turbo brush should be checked periodically. According your
usage and type of dirt soaked by brush ropes, hairs fibres and similar dirts abstract
the spiral brush bar and spiral brush bar could not turn properly. For these reason
periodically look at the bottom side of the turbo brush for checking the turning of the
spiral brush bar after operating the vacuum cleaner. If it doesn't move freely clean
the turbo brush.
6