Blagdon Liberty Pump & Barrel Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Attrezzature per prato e giardino Blagdon Liberty Pump & Barrel. Blagdon Liberty Pump & Barrel 8.

Carefully remove components from the box, lay them on a flat surface. The power set is not pre-connected,

this is a straight forward process and all connections are colour coded for easy use, please see step 4 and

step 5 for further details.

Place the pump and the LED light in

the barrel and feed the light's cable

and the pump's cable through the

hole on top of the raised section,

cables exit out from the access

panel ready for connection to the

control panel. Note the LED light

can be fixed to a post in the bottom

of barrel.

Attach the blue plug of the pump into

control panel's blue socket (see diagram

and pic A). Attach the orange plug of the

LED light into control panel's orange socket

(see diagram and pic B). Don't forget to

close the control panel's yellow port with

the rubber socket protector.

The yellow port is used for recharging and

connecting to a solar panel which is sold

separately (see pic B). Insert the control

panel into the side access panel.

Please note there is a small hole beside the

access panel. This hole will be used to feed

the solar panel cable through to connect

with control panel when you upgrade to a

solar panel.

Place the lower column and bucket onto the barrel, its black base

board can be supported with the raised two spots on barrel wall.

Then connect the upper column to the lower column, feed the

hose through the lower column down to barrel and connect to

pump. (see diagram)