3D Factories EASY 3D MAKER Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Stampanti 3D 3D Factories EASY 3D MAKER. 3D Factories EASY 3D MAKER 14.

Remove material carefully avoid to damage of print bed

Scratching the surface, which occurs during the operation is not reason for impossibility to print.

Print quality is affected and the risk of damage to your printer comes with deeper grooves, pits and uneven

print surface. See flatness control the print area

8.3 KALIBRACE TISKOVÉ PLOCHY

Due to transportation, changes in temperature and humidity or wear of mechanical components operating is

shifting print area and must be reset. This setting has a direct impact on the quality of printing, but also the

safe operation of the printer. Nozzle height above the floor must be always the same control points.

Need to calibrate a standard sheet of paper 80 g/m2 to insert between the nozzle and the surface of the table.

First Turn on the printer and run the software G3DMAKER. Go to MANUAL CONTROL menu and here at the

bottom click on HOME Z. printer moves to the reference position to the Z axis, then turn off the printer.

VERSION: 1.9.2012

- 7 -