Arnu Box MACH 10 64BIT Manuale d'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale d'uso per Lettore multimediale Arnu Box MACH 10 64BIT. Arnu Box MACH 10 64BIT 15.
Stampa la pagina
SECTION 5
Frequently Asked Questions
5.1 Android™ FAQ
I just started my box for the first time, it's asking me which launcher
to use
We suggest using our Code Red Launcher. It was specifically designed for the ARNU
™
Box™ Android
.
How do I factory rest my ARNU Box™ Android™
1.
Open up Cloudword Sync
2.
Under the Firmware section, you will see an item called Factory Reset. Click OK
on it
It will automatically reboot your system and return your ARNU Box™ Android™
3.
device to it's default state
I just received my unit and I don't see some applications that should
be there
On first time boot, the ARNU Box™ Android™ box will install applications in the
background.
Please give it a couple of minutes on first boot and you will start to see the
applications appearing in the Application drawer.
Cloudword Sync is saying I am not authroized
If you are using Ethernet, try switching to WiFi.
If the issue persists, please contact us at [email protected]
Why is my Internet connection running so slow?
Try moving your ARNU Box™ Android
There is usually interference that will cause signal loss which can be due to multiple
things:
1.
Poor router wireless signal
2.
Objects sitting on top of the ARNU Box™ Device or in a location that is blocking
the antenna signal
Too far away from router
3.
4.
Using WiFi connection from a far distance
23
™
device to another location
SECTION 5
Frequently Asked Questions
5.2 Pure Linux FAQ
How do I Factory Reset from KODI™
1.
Go to the Add-ons menu item
2.
Select Programs and press OK on your remote
3.
Find System Settings and press OK on your remote
4.
Press right on your control, go down to Factory Reset and press OK on your
remote
5.
You will be prompted with a question saying "Are you sure you want to perform
Factory Reset" Goto Yes and press OK on your remote
6.
The box will automatically reboot. DO NOT TURN OFF YOUR BOX AT ANY POINT,
it is doing a factory reset. You will be prompted with the ARNU Box Pure Linux
screen. Please wait for a bit as the system is rebuilding the box.
Why can't I connect to my WiFi?
Make sure your routers wireless security is set to WPA or WPA2. If you are using
Ÿ
WEP encryption you will not be able to connect to your wireless connection.
Try moving your box closer to your router, you might have interference.
Ÿ
Try changing the length of your SSID password to less than 8 characters.
Ÿ
How do I connect my box with WinSCP?
1.
Download WinSCP for Windows
2.
Run WinSCP and setup a new session
3.
Make sure to change the File Protocol to SCP
4.
Enter the IP address of the box and use the following credentials
Username: root
Password: letmein
5.
Click login
24