ARO RS26A–VLV Manuale dell'operatore - Pagina 3
Sfoglia online o scarica il pdf Manuale dell'operatore per Sander ARO RS26A–VLV. ARO RS26A–VLV 8. Random orbital sanders rs2**a series; rs2**a-***-eu;
Stampa la paginaLUBRICATION
ARO Part #
Where Used
''O" Rings & Lip Seals
Gears and Bearings
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–
Regulator Unit:
ARO Model P29231–110 plus 100067 Gauge
After each 160 hours of operation, inject one or two
strokes of ARO Part #33153 grease through the end of
the spindle (27) to lubricate the needle bearing which is
in the end of the counterbalance (26). The sanding pad
(29) must be removed from the spindle to allow injection
of the grease.
Description
36460
4 oz. Stringy
Lubricant
33153
5 lb. ''EP" – NLGI
#1 Grease
Do not mark any nonmetallic surface on this tool
with customer identification codes. Such actions
could affect tool performance.
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
3
FILTER
COMPRESSOR
(Dwg. TPD905–1)
M10
129