CubeWORKS CubiSens TS100 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Accessories CubeWORKS CubiSens TS100. CubeWORKS CubiSens TS100 15. Wireless temperature sensor

Introduction

CubiSens

TS100 Wireless Temperature Sensor (TS100 in short) is a millimeter-scale wireless sensor for

accurate, real-time temperature measurement. Measuring only 7.5 x 7.5 x 4.2 mm, the TS100 is capable

of transmitting up to 100m in distance and last up to 2 years in sensing operation. The device is packaged

in bio-compatible epoxy and coated with parylene, making it ideal for implanting in animal models. The

TS100 Communication Kit includes a Windows-compatible GUI software, which allows the user to start

operations, stop operations, and view the received data. This document serves as the user manual for the

TS100, as well as an installation manual for setting up the TS100 Communication Kit.

•

Abrupt Temperature Change During Measurement:

<20°C change between successive measurements. For example, if the TS100 needs to be abruptly

dropped into a hot or cold liquid during measurement resulting in a rapid temperature change of 40°C,

the measurement interval should be set to no more than 5 seconds, which is about 1/2 the thermal

response time of the unit.

•

Battery Life:

The TS100 operation lifetime varies significantly depending on the exposed temperature

and measurement interval. Before starting measurement operation, please refer to Figure 1 of "TS100

Technical Datasheet" to select the appropriate measurement interval.

•

Temperature Exposure:

55˚C). Optical communication must be performed at room temperature (20-30˚C) in an indoor

environment. Please refer to Technical Specifications section for details on other temperature limits.

Please allow at least 5 minutes for the unit to acclimate to a new temperature environment before

initiating optical communication in case of an abrupt temperature change.

•

Manual Handling:

directly grabbing the unit in certain ways can temporarily shift radio frequency of the integrated

antenna and hamper wireless communication. Also, handling with sharp objects that can

compromise the coating should be avoided.

Figure 1. CubiSens

TS100 Wireless Temperature Sensor

The TS100 is designed for indoor environments and animal implants (10-

Each unit is coated to protect the electronics from manual handling. However,

CubiSens

Measurement interval must be set to ensure

TS100 User Manual

v1.7

Page 3 / 15