Cubic casja80l Manuale di istruzioni - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per Prodotto per la cura degli animali domestici Cubic casja80l. Cubic casja80l 15. Jellyfish aquarium

Stampa la pagina

FILTER SPONGE

The aquarium comes with 2 x carbon impregnated filter sponges

correctly into their respective guides on either side of the rear perforated diffuser plate

trap any waste or uneaten food, and will help disperse the suction of water through the rear diffuser plate over a wide

area to ensure no livestock becomes trapped against the diffuser plate.

Fig.4A

Fig.5

ADDING AN EXTERNAL

FILTER OR CHILLER

If using a chiller or remote power filter, unscrew the two blanking plug flanges

from the inlet and outlet pipework on the outside of the rear panel

connect using the supplied male and female hose tails. If hard-plumbing the

aquarium, the blanking plugs may be cut, leaving enough pipe left over to allow

bonding to other fittings. IMPORTANT: Always use inline taps between the

aquarium and any external equipment so that water lines may be closed in the

event of a leak. If not using any kind of external device, ensure both blanking

plugs are tightened gently by hand prior to filling the aquarium.

(Fig

4A). Ensure that both sponges are seated

Fig.4B

LED LIGHT STRIP

Trace the cable from the LED light strip

exits from the removable cover at the centre of the rear

diffuser plate. Connect the end of this cable to its respec-

tive partner which can be found exiting the electrical

distribution box. Ensure that the threaded coupling is

firmly connected and tightened to ensure a water tight

seal. Should the LED light strip require replacement at

any time, this can easily be done by removing the

protective top cover on the light strip channel

and sliding the old strip out prior to replacement with a

new unit.

(Fig6:a)

and

(Fig

4B). The sponges will help

(Fig5: B)

which

(Fig5: A)

Fig.6

page