AcouLab Premiere S Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti AcouLab Premiere S. AcouLab Premiere S 19. Active loudspeaker with motional feedback & dsp

Stampa la pagina

Getting started

Familiarize yourself with the safety instructions outlined in this

document (Page 4-5).

2. Place the speakers in their desired position. Refer to page 15 for

placement advice.

3. Connect your source device to one of the three inputs. Refer to page 10

for detailed information.

4. Connect the device to the mains. If no LED lights up on the back panel,

assure that the mains switch is turned on.

5. Set the desired mode of operation by pressing the "Power Mode"

actuator. Refer to page 12 for detailed information.

If you wish to use the trigger functionality, connect the trigger input to

your source device.

6. If you are using the AES/EBU digital input, adjust each speaker's

"Position" setting to reﬂect its location relative to your listening

position.

7. You're all set ! Enjoy your new AcouLab speakers.

Should you run into trouble at any point of the setup, do not hesitate to

contact AcouLab.