Aroma AWK-162BD Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Bollitore Aroma AWK-162BD. Aroma AWK-162BD 7.
Anche per Aroma AWK-162BD: Manuale di istruzioni (12 pagine)

Stampa la pagina

Before First Use

1. Read all instructions and important safeguards.

2. Remove all packaging materials and check that

all items have been received in good condition.

3. Tear up all plastic bags and dispose of them

properly as they can pose a risk to children.

4. Clean the interior of the kettle with a soft sponge

and warm, soapy water. If your hand will not

fit inside the kettle, swish warm, soapy water

around in the interior of the kettle with the

kettle lid closed. Take care to keep the electrical

components on the exterior of the kettle dry.

5. Rinse and drain any remaining soapy water from

the kettle.

6. With a damp cloth, gently wipe the exterior of the

kettle. Do not wipe electrical components as this

may cause damage to the unit.

7. Dry the interior and exterior of the kettle

thoroughly before placing the kettle onto the

power base.

8. Following the instructions in "Heating Water" on

pages 7-8, boil 7 cups of water. Once the water

has boiled, pour it out then rinse the inside of the

kettle once more with warm water. The kettle is

now ready for use.

To Clean

1. Clean the interior of the kettle with a soft

sponge and warm, soapy water. If your hand

will not fit inside the kettle, swish warm, soapy

water around in the interior of the kettle with

the kettle lid closed. Take care to keep the

electrical components on the exterior of the

kettle dry.

2. Rinse and drain any remaining soapy water

from the kettle.

3. With a damp cloth, gently wipe the exterior of

the kettle. Do not wipe electrical components

as this may cause damage to the unit.

4. Dry the interior and exterior of the kettle

thoroughly before placing it back onto the

power base.

The water is boiling, but the kettle does not

Caution:

turn off.

· Never attempt to

disassemble the kettle or

the power base.

· Never immerse the

The kettle will not turn on.

kettle, power cord, plug

or power base in water.

· Always take care not

to allow electrical

components to come

into contact with water.

· Do not use abrasive

cleaners or scouring

pads of any kind on the

kettle or power base.

There are mineral deposits on the interior of

This will cause damage

to the finish and may

the kettle.

create a risk of electrical

shock.

If the kettle is heated with no water inside, the

internal safety mechanism will automatically

turn the kettle off.

Caution:

Always unplug the

kettle and allow it to

cool completely before

cleaning.

1. Place the power base on a sturdy, level and dry

2. Open the kettle lid using the lid release button

3. Close the lid, ensuring it locks into place.

4. Plug the power cord into an available 120V AC

Troubleshooting

The auto shut-off function will not operate

properly if the lid is not completely closed.

Allow the kettle to cool, then check to see

that the lid is properly locked into place.

Make sure that the kettle is seated properly

on the power base and that the base is

connected to a functioning electrical outlet.

Water or debris on the bottom of the kettle

or on the power base may interfere with

the functioning of the kettle. Be sure that

the base of the kettle and the power base

are dry and free of debris.

A certain amount of scale build-up is

normal after use and is caused by minerals

contained in hard water.

To remove deposits, refer to "Mineral

Deposits" on page 9.

Remove the kettle from the power base

and fill with at least 2 cups of water then

return to the power base. The kettle will

begin working again once the internal

temperature has dropped to a safe level.

Heating Water

surface.

and fill with water. Water must be filled between

the MIN and MAX levels.

wall outlet.

continued on next page>>

Note:

· If the problem persists,

please contact our

customer service

department at 1-800-

276-6286 or by email

at CustomerService@

AromaCo.com.

Caution:

The glass portion of

the kettle will become

extremely hot during use

and remain hot for some

time after. Do not touch

the glass body until

the kettle has cooled

completely.