CubuSynth Exhaust Manuale d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'uso per Unità di controllo CubuSynth Exhaust. CubuSynth Exhaust 5. Expander module for the engine
Anche per CubuSynth Exhaust: Manuale di costruzione (12 pagine)
Stampa la paginaCubuSynth Engine – User Manual
PCB V1.1 Jul 2022
1. Introduction
The Exhaust adds many features to your Engine VCO module like Sub-octaves, Mixing and a Gate
generated by the Chaos signal.
You can select one of the two VCO cores of the engine to Produce Square Waves one and two
octaves below the Oscillators frequency. You can set the level of each octave by its volume
knobs and listen to them from the "Sub" output. They are also Mixed into the Main "Mix" output.
The knobs "VCO1" "VCO2" and "AM" set the level of the selected waveform of each VCO and the
AM output from the Engine to the Main Mix. The "Ext In" Input is normalled from the RM output,
but you can plug in any other signal to go to the Main Mix.
The V Ref sets a Voltage between -10V and +10V which compares against the Chaos signal from
the engine. Whenever the Chaos signal is higher in Voltage than the Knob setting, It will Give you
a Gate signal. There is also a CV input, which offsets your V Ref and can create interesting
Rhythms. This function works best when the "Clock In" on the Engine is synced by your Main
Clock.
Visual Demonstration of the Gate Output:
Page 2