AromaTech Air stream single Manuale del prodotto - Pagina 6
Sfoglia online o scarica il pdf Manuale del prodotto per Apparecchiature mediche AromaTech Air stream single. AromaTech Air stream single 9.
Stampa la paginaWall Mount Installation
1. Use the screws to fasten the bracket to the wall.
2.Wrap the neck of the bottle with PTFE tape to seal it and screw the bottle to the
diffuser.
3.Connect the air tube to the pumps air outlet.
4.Connect the other end of the air tube to the adaptor on the bracket.
5: Take an HVAC adaptor and screw it to the top of the diffuser.
6. Connect a separate 6 -12 inch air tube to the diffuser top.
7. Connect the air tube from the top of the diffuser into the air duct by drilling a 6mm
opening past the filters. Make sure the tube is pointing with the direction of the air
flow not against it.
8.Connect with power supply,turn on the air pump switch;
-10-
HVAC connection
SET
ENT
Air outlet
hole
TIME SETTING
Mon
TUES
WED
Mon-Sun 7 day timer
THUR
FRI
SAT
SUN
Power ON
Connect the 12V adaptor to the outlet and turn ON the power switch. Local time and scent
intensity grade will come on.
Power OFF
Turn off the power switch
Screen Lock and Unlock
The LCD screen will automatically lock itself after 10 seconds if not used. Press SET and hold
for 5 seconds to unlock the display.
Local time setting
Press SET button for 3 seconds until you hear a beep to enter
local time setting menu. Press
or▲button to choose the correct
day. Then press ENT button to move to local time setting. Press
or▲button to change the number. Press ENT button to move
to another position. Press SET to confirm (Figure 1).
local time
work icon
atomization grade
Mon
TUES
WED
THUR
FRI
SAT
SUN
(1)
-11-