displayit flare Manuale di istruzioni per il montaggio - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Arredamento per interni displayit flare. displayit flare 6. Accessory kiosk with three shelves
Anche per displayit flare: Istruzioni per il montaggio (2 pagine)

Stampa la pagina
Caution! Installing silicone-edged graphics is techniqe sensitive;
Practice will shorten installation time.
Handle graphics with care with clean hands in a clean environment.
Cloth or latex gloves recommended.
Keep graphics away from sharp objects.
1. Using at least two people,
carefully stand the display up.
Starting in top-left corner, turn
and tuck graphic and silicone
into the channel. (#1 on diagram)
Use your fingertip (not fingernail)
for installation.
Note: For large frames, a step ladder
may be required for graphic installation.
Top of Frame
2. Work across the top, tacking the graphic into the channel
every two to three feet. (#2 on diagram)
3. Tuck top, right corner into channel. (#3 on diagram)
4. Tuck remainder of top edge of graphic into top channel.
(#4 on diagram)
5. Inspect graphic for hard fold lines in the fabric.
If desired, smooth them out using a fabric steamer.
6. Tuck bottom two corners. (#6 on diagram)
7. Tack middle of sides. (#7 on diagram)
8. Working from top to bottom, tuck remaining silicone in
on both sides. (#8 on diagram)
9. Tack middle of bottom. (#9 on diagram)
10. Tuck remaining bottom edge, working from outside to
inside. (#10 on diagram)
11. Repeat installation steps for fabric on back of frame.
displayit.com
Graphic Installation
Fabric
Graphic
Silicone Welt
(On Back)
Fabric
Silicone
800.207.0311
After-Hours Emergency: Call or Text 678.723.5343
8' (92" x 92") Flare
Assembly Instructions Page 5
1
2
4
7
6
8
10
2
2
3
4
7
6
8
9
10
Flare v2.0 Updated 11/22/2016