Displays2go LDLECTFR1 Istruzioni - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per Arredamento per interni Displays2go LDLECTFR1. Displays2go LDLECTFR1 2.

Instruction of the RGB remote control

1. This product is equipped with a RGB remote control.

2. Before use, remove the insulating paper from the battery compartment on the back of the remote control so that the remote

control can be powered on.

3. Point the remote control at the podium within the acceptance range and press the corresponding function button on the

remote control to complete the operation according to actual needs.

Mode

Sh o rtcut Key

Color

Sh o rtcut Ke

Notes:

•

The RGB LED lights of this product can be set as static/dynamic

mode, single-color or multi-color mode.

•

The brightness and fade-in and fade-out effects can be adjusted

with remote control.

Cleaning instruction

Cleaning Instruction

Issue

a. If only dust on the acrylic sheet, just use a soft cotton cloth dipped in 1 % soapy water and gently

b. If the dust may contain hard objects, it is recommended to wipe the hard objects gently and then

With dust

For dirt that is difficult to remove, such as oil layer, it is recommended to wipe it with warm water with

a neutral detergent. Since acrylic will chemically react with organic solvents, cracks will occur after

Oil layer

the acrylic is corroded. Please confirm that the neutral detergent does not contain organic solvents

before using it.

If the acrylic is glued to the all-purpose glue, you can use banana water or 10% alcohol to gently wipe

it repeatedly, or you can use a hair dryer to blow on the part with the all-purpose glue for a while. After

Glue

the glue is soft, tear it off and use a soft cloth. Wipe clean gently.

If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G customer service at 844-221-3388.

•

e e e

•

GXv

••••

•••

••••

LTECI-I

wipe it.

wipe with a soft cotton cloth. Please remember to wipe with a soft cloth otherwise, the surface is

easily scratched.

Loo p Play

---O _ N _ / O _ FF

Sp e ed + / Sp e ed-

n _ e_ ss _ + / -

- - B r_ i g _h t

Remote:

• Working Voltage:

• Working Frequency: 433.92MHz

• Working Temp.:

• Dimensions:

• Weight(N.W.):

Scan QR code to visit product page

3V (battery CR2032)

-30

C~55

L104xWS8xH9(mm)

42g