Displays2go TVCON58OK Istruzioni per il montaggio
Sfoglia online o scarica il pdf Istruzioni per il montaggio per Arredamento per interni Displays2go TVCON58OK. Displays2go TVCON58OK 3. 58” tv console
Stampa la pagina
ASSEMBLY INSTRUCTIONS
58" TV Console
TVCON58MO
TVCON58SS
TVCON58OK
2 people
are required
How to join 2 boards with CAM lock:
(a) Insert cam post into flat surface of a board and fix it with
a screw driver. Do not over tighten. Fit the hole in the edge
of the joining board over the cam post.
(b) Insert the cam lock into the cam hole. Be sure the
opening section on the back fits the head of the cam post.
(c) Use a screw driver to turn the cam lock clockwise so it
locks onto the head of the cam post. Do not over tighten.
1. Insert 2 cam posts (H2) into holes on 1 Back Panel D.
Tighten only until snug. Fit cam holes in the edge of 1 Shelf
E over the cam posts. Insert 2 cam locks (H1) into cam lock
holes on the Shelf E, use a phillips screw driver to turn cam
locks clockwise to secure cam posts.
DO NOT over-tighten.
D
No. Qty.
A
B
C
D
Tool Needed:
E
F
Phillips Screwdriver
(a)
Join Panels
2. Insert cam posts into Panel B that has cam holes on both
sides. Sandwich the assembled Panel D and E with Panel B by
inserting cam posts into the cam lock holes as shown below.
Insert cam locks into cam lock holes then turn cam locks
clockwise with a phillips screw driver to secure cam posts.
E
B
PARTS LIST
Description
No.
Qty.
Top Panel
1
H1
46
4
Side Panel
H2
46
1
Bottom Panel
H3
5
3
Back Panel
H4
4
1
Shelf
H5
4
5
Foot
(b)
H1
H2
Insert Cam Lock
V21.05
Description
Cam Lock
Cam Post
Foot Bolt
Grommet Cap
Grommet Sleeve
(c)
Tighten Cam Lock
B
1 of 3