Distek 2500 Select Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Apparecchiature industriali Distek 2500 Select. Distek 2500 Select 10.
Anche per Distek 2500 Select: Nota di servizio (6 pagine)
Stampa la pagina
Model 2500 Quick Start Manual
1
Follow the procedure below to set the height using paddles or baskets:
Initial Adjustment (Using Paddles)
1
Turn the Easy Drive Lift knob about 1/2 turn following the direction of the "Released"
indicator.
2
Fully raise the drive head and turn the Easy Drive Lift knob following the direction of the
"Lock" indicator, to lock the drive head in place.
3
Position the height setting to Neutral by positioning the Quick Height Adjustment block to
horizontal position. See figure below for reference.
4
Gently slide each shaft halfway up through each spindle. If shafts are hard to to slide, a
very thin film of vacuum grease applied on the top end of the shaft will allow it to slide
smoothly.
Height Adjustment
The apparatus height is set and configured for baskets and paddles
purchased at Distek, and should not have to be changed unless the height is
out of specification.
Always use paddle blades to set the shaft height initially before switching to
baskets.
For better height adjustment reproducibility, it is recommended to keep vessels
in the same position after emptying and washing.
Height adjustment block in horizontal position
Height Adjustment
© 2017 Distek, Inc. All Rights Reserved
2