CAME 319U36EN Manuale di installazione - Pagina 10

Sfoglia online o scarica il pdf Manuale di installazione per Pannello di controllo CAME 319U36EN. CAME 319U36EN 19. Control panel for 24v gearmotors

7 Selecting functions

10-WAY DIP-SWITCH

DIP

POS

UNCTION ACTIVATED

1 ON -

Automatic closing - The automatic closing timer activates at the closing endpoint. The pre-set time is adjustable, but it's in any

case subject to any safety device intervention and does not activate after a total "stop" or in case of power failure.

2 OFF -

"Open-stop-close-stop" function with (2-7) button and transmitter.

2 ON -

"Open-close" function with (2-7) function and transmitter.

3 ON -

"Open only" function with transmitter.

4 ON -

Opening and closing preﬂ ashing - After either an opening or closing command, the ﬂ ashing light connected on 10-E, ﬂ ashes

for 5 seconds before beginning to execute the command.

5 ON -

Obstacle detection - With motor idle (door-leaf closed, open or after a total stop command), it prevents any movement if the

safety devices (e.g. photocells) detect an obstacle.

6 ON -

Maintained action - Door opens and closes only if button is kept pressed.

7 ON -

Ramming function activated - At each opening command, the door presses against the strike plate for one second, facilitating

the release operation for the electro lock connected on terminals 11-S.

8 OFF -

Partial stop - Door stops is in movement which consequently triggers automatic closing, insert the safety device on terminal

(2-C3);if unused, set DIP switch to ON.

9 OFF -

Total stop - This function stops the door and then excludes any automatic closing cycle; use either the buttons or transmitter to

resume movement. Insert safety device on [1-C2]; if unused, set DIP switch to ON.

10 OFF - Reopening during closing - The photocells, detect an obstacle during the closing phase of the door leaf, triggering an inversion

of travel direction, until door is fully open; Insert the safety device on terminal (2-C1); if unused, set DIP switch to ON.

4-WAY DIP-SWITCH

1 - Must stay OFF

2 - Must stay OFF

3 ON - Activates the safety tests to check photocell effi ciency.

4 - Unused