3DGence DOUBLE P255 Manuale di manutenzione - Pagina 17

Sfoglia online o scarica il pdf Manuale di manutenzione per Stampanti 3D 3DGence DOUBLE P255. 3DGence DOUBLE P255 19.

LUBRICATING THE TRAPEZOID BOLT

1. Set the heatbed to the lower position (Menu → Lower heatbed).

2. Move heatbed towards to you.

3. Lubricate trapezoid bolts and linear guides:

- Push grease into the grease nipple and around of the left linear carriage (Fig.73). It is located at the top of the

liner carriage. Push grease out by pressing the lubricator nozzle firmly against the grease nipple and pressing

smoothly the lubricator lever once.

Fig.73 Linear carriage grease nipple

4. Apply grease to the raceway of the trapezoid bolts (left and right) Fig.74

using a wooden stick (or other blunt tool).

-Apply the grease every 5 cm.

Fig.74 Trapezoid bolt raceway

6. Raise the heatbed (Menu-> Upper heatbed).

7. Lower the heatbed (Menu ->Lower heatbed).

8. Collect excess grease from linear carriages and trapezoid bolt nuts using a paper towel.

9. Apply grease to the raceway of the trapezoid bolts (left and right) using a wooden stick (or other blunt tool).

3DGence DOUBLE P255 - maintenance activities | version 07.2021