CAME C-BXT Manuale di installazione - Pagina 17

Sfoglia online o scarica il pdf Manuale di installazione per Sistema di apertura della porta CAME C-BXT. CAME C-BXT 20. Gearmotor for sectional doors

Important! For gearmotors installed on

sliding and folding doors, remove the

security lever and respective spring.

5.10 Adjusting end-stops with encoder

Before beginning to make adjustments

on the end-stop, execute the run calibra-

tion procedure described in the technical

manual of the command board.

After calibrating, the door must be in a

closed position and the crown wheel on

the motor unit must be positioned to the

left.

Raise the end-stop spring unhooking it

from the support bracket and lower it

onto the crown wheel.

Important! For gearmotors installed on

sliding and folding doors, never unhook

the end-stop spring from the support

bracket.

Ensure that the release lever is free from

the safety lever.

NB: the safety lever releases the

emergency release (CMS or C002) only

with the door closed.

Safety

lever

Crown wheel

End-stop spring

Safety lever

Release lever

Support bracket