Acoustic Research AWSBTSK Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Acoustic Research AWSBTSK. Acoustic Research AWSBTSK 6. Portable wireless speaker

Stampa la pagina

Powering the Speaker System

Powering the Speaker

There are two options to power your wireless speaker: using the included AC power

adapter or using 6 AA batteries (not included).

AA Batteries

shows the status

1. Twist the bolts on the bottom of the speaker counter-clockwise to loosen them

completely.

2. Remove the bottom of the speaker to access the battery compartment.

3. Insert six (6) AA batteries (not included) into the battery compartment, following the

polarity diagrams (+ and –).

4. Line the bolts on the compartment door up with the holes on either side of the battery

compartment and place the speaker bottom back on the speaker.

5. Screw the bolts back in and tighten them.

Note:

DO NOT

alkaline battery).

the product when not in use for long periods. Always remove old, weak or worn-out batteries

promptly and recycle or dispose of them in accordance with local and national regulations.

Setting Up Bluetooth Wireless

Pairing

Any Bluetooth-enabled device that you wish to stream audio to your speaker system must

ﬁ rst be paired to the speaker. The process is simple, and in most cases the pairing process

needs to be done only once.

To pair your Bluetooth-enabled device with the speaker:

1. Make sure your device's Bluetooth is turned on. See the wireless and/or network

settings menu on your device to check.

2. If the speaker isn't already on, press and hold the

You will hear 4 beeps to indicate the speaker is turned on. The indicator light on the

front of the speaker starts ﬂ ashing blue.

3. Press and hold for 3 seconds the Pair button to enter pairing mode. You will hear 2

beeps to indicate pairing mode is entered. The indicator on the front of the speaker

starts blinking faster.

4. Open the Bluetooth settings menu on your device. Select "AWSBT1" from the list

of devices available (you might have to scan for devices). If your device asks for a

password, enter "0000".

5. A conﬁ rmation screen will appear on your device once the speaker and the device

are successfully paired. The blue indicator turns solid blue to indicate successful

connection. The speaker is now ready for you to stream audio from your device.

6. Turn the volume on your device to at least 3/4 max, then start playing something on

the device. Control the speaker volume on the speaker itself, using the +/– buttons on

the top of the speaker.

Note:

If you notice the sound from the speaker is distorted, turn down your device's volume.

•

You will hear a beep if you turn the speaker's volume up to the maximum.

•

Speaker

(side panel)

120V AC

wall outlet

AC Power

Adapter

Place the rubber cap in the speaker power input jack when using batteries.

mix batteries with different chemistry types (for example, a zinc battery with an

DO NOT

mix new and used batteries.

AC Power Adapter

Insert the small, round plug from the speaker

AC power adapter into the DC IN jack on the

side panel of the speaker.

2. Plug the other end of the speaker AC power

adapter into any standard 120V AC wall

outlet.

Note:

The power unit should be plugged in so

that it stays vertical or lies ﬂ at.

DO NOT

leave batteries installed in

button for 3 seconds to turn it on.