Alto AMX-100FX Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Mixer musicale Alto AMX-100FX. Alto AMX-100FX 20. Compact mixer with digital effect

Stampa la pagina

4. CONTROL ELEMENTS

1 MONO MIC/LINE CHANNELS

Your AMX-100(FX) is equipped with 2 low-noise

microphone preamplifiers with optional phantom

power, 44dB of Gain and over 100dB of S/N ratio.

You can connect almost any type of microphone.

Dynamic microphones do not need phantom power.

Use phantom power only with condenser

microphones but make sure that the phantom

power button is disengaged before connecting the

microphone. Phantom power will not damage your

dynamic microphones but it may damage tube or

ribbon microphones, so make sure to read the

microphone instructions manual before engage

phantom power.

Use button (2) to activate/deactivate phantom

power. These two channels are also equipped

with 1/4" TRS balanced/unbalanced plugs to

connect line-level instruments such as keyboards,

drum machines and effect devices.

NOTE:

Never try to connect a line-level signal to the XLR MIC input when

the phantom power is engaged, or you may seriously damage your equipment.

2 PHANTOM

This switch will apply +48 Volt Phantom Power only to

the 2 XLR microphone inputs. Never connect

microphones when the phantom power is already ON .

3 TRIM

This control is provided with 2 different indication rings:

one is for the MIC and the other for the LINE input.

When you use a Microphone, you shall read the OUTSIDE ring (0~44dB);

when you use a line level instrument, you shall read the INSIDE ring

(+15~30dB), For optimum operation, you shall set this control in a way

that the PEAK LED will light up only occasionally in order to avoid distortion

on the input channel.

4 STEREO INPUTS

These are channels 3/4 and 5/6. They are

organised in stereo pair and provided with

1/4" TRS phone sockets. If you connect only

the LEFT jack, the input will operate in mono

mode. You can use these inputs with a stereo

keyboard, drum machine, etc.

MIC 1

J.T.

BAL OR

UNBAL

LINE IN 1

TRIM

+15dB

-30dB LINE

0dB

44dB MIC

PHANTOM

LINE IN 3/4

LINE IN 5/6

LEFT (MONO)

RIGHT